Description
Three bridge semi-trailer truck configuration table
Product name: 8-bit semi-trailer
Basic configuration:
| Length/Width | 17100mm*2550mm*3500mm | |
| axle | 3-Axis Specialized Freight Vehicle 1950 | 3 |
| tyre | 11.00R20/12.00R20/12R22.5/315/80R22.5/385/65R22.5 (optional)
| 12 |
| steel ring | 8.5-20/9.0-20/9.0-22.5/11.75-22.5 (optional)
| 12 |
| baseboard | Punched plate 2.75mm | |
| landing leg | Simple legs | Page 1 |
| summer beam | The upper wing plate measures 10mm wide by 100mm, while the lower wing plate is 10mm wide by 100mm. The vertical plate is 8mm thick and 420mm high. The bent components are made of high-strength T700 material. | |
| hold-all | 1 | |
| Traction pin | JOST 2-inch (50mm) or 3.5-inch (90mm) | |
| ABS | Komai 4S2M/WABCO | |
| air reservoir air receiver | 2 x 40L,1 x 50L | |
| Backup tire rack | 1 | |
| Synch valve | Three bridges synchronized | |
| laminated spring | 90mm wide x 4 pieces x 22mm thick | 6 |
| suspension | Mechanical suspension / Air suspension | |
| brake chamber | 6 pairs | |
| power line | 30 sq ft | |
| hydraulic pressure | 8 hydraulic lifts, 2 floors, 1 rear sliding door | |
| lamps and lanterns | LED | |
| Second floor | High-strength bending component for second-floor edge beam No.6 | |
| be generally called | Square tube (4# high strength 510) | |
| upright column | Bent part 5# manganese steel |
- The upper deck is divided into two sections, front and rear, and can carry eight cars or SUVs.
- Full hydraulic lift on top.
- There is a pair of loading ladders on the lower level.
- A plane jumps in the middle of the bottom layer.
- Includes one set of electric power supply, motor 5000 (excluding battery).
- 16 straps, 2 fire extinguishers.
- There are 22 in the upper layer and 14 in the lower layer, a total of 36.
